TDK Announces 24V DIN Rail Power Supply Certified to Class II and Class 2 standards

February 25th, 2019

TDK Corporation (TSE 6762) announces the introduction of an 88W rated 24V model to the DRL series of low profile AC-DC DIN rail mount power supplies.  The DRL100-24-1/C2 is certified as a Class 2 power supply, in accordance with NEC (per UL1310), and as a Limited Power Source (per UL 60950 clause 2.5 requirements).  The unit is also has a Class II construction with double insulation for operation without an earth ground connection.  Applications include building automation, security systems, industrial process control, factory automation, and test and measurement equipment.

Learn more at www.us.tdk-lambda.com

TDK Announces 95% Efficient 960W DIN Rail Power Supply has a 1440W Peak Power Capability

February 25th, 2019

 

TDK Corporation (TSE 6762) announces the introduction of a 960W rated model to the DRF series of AC-DC DIN rail mount power supplies.  The high 95% efficiency produces less internal waste heat enabling electrolytic capacitors to run cooler, providing a calculated life of in excess of eleven years with a 75% load at 230Vac input.  The unit can supply a peak load of 1440W (24V 60A) for up to 4 seconds to power capacitive and inductive loads.  Applications include industrial process control, factory automation, and test and measurement equipment.

Learn more at www.us.tdk-lambda.com

TDK Corporation announces Convection Cooled 600W Programmable Power Supplies Are Certified to Medical and Industrial Standards

February 6th, 2019

 

TDK Corporation (TSE 6762) announces the introduction of the TDK-Lambda GXE600 programmable AC-DC power supplies.  The convection cooled 600W rated series is certified to the medical IEC 60601-1 and industrial IEC 60950-1 and IEC 62368-1 standards. The GXE600 is suitable for medical, industrial, test and measurement applications requiring wide-range output voltage and current programming, with sensitivity to noise from cooling fans.

The GXE600 is available with a nominal 24V or 48V output and can be programmed, using the RS-485 interface (Modbus RTU protocol) or an external 0 – 6V analog signal, for constant voltage and constant current (CVCC) operation.  The programming range is 20% to 120% for the voltage and 20% to 100% for the current.  In addition, the parameters for fault programming (protection level and recovery characteristics) and the slew rate timing can be changed.  Remaining electrolytic capacitor life, operating hours and alarm history can be read through the RS-485 interface, aiding remote preventative maintenance.

More information available at us.tdk-lambda.com

Are Your Electronics Prepared to Weather the Storm?

August 8th, 2018

 

As we delve into the warm summer months, 2018’s hurricane season is just around the corner and shaping up to be a year with above-average hurricane strength and activity. The environmental effects brought upon by serious weather events can be especially threatening to mechanical and electronic instruments, making it critical to find protective solutions.

For 70 years, APM Hexseal has been providing our customers with reliable, secure sealing solutions for a wide array of fields and industries. Learn more at apmhexseal.com

C&K’s New KSC PF Switch is Compact, Water Resiliant and Potting Friendly

August 8th, 2018

The new KSC PF switch provides designers with a next-generation switch solution that is compact yet resilient to water ingression – and made to be potting friendly.

Features include:

  • Unique combination of a compact form factor (6.2 x 6.2 x 5.2mm)
  • IP67 sealed with life cycles up to 1,000,000
  • SMT soft actuator tactile switch with a potting friendly extended cage, which decreases potting level tolerance, enables faster production and increases quality. Potting is often necessary to ensure complete protection while a sealed switch is in use – but potting levels are typically difficult to control in production. In addition, the traditional method of using a flat switch top risks the possibility of potting moving inward and blocking the actuator. By incorporating an extended cage, this issue is avoided.

Learn more at www.ckswitches.com

Mill-Max Introduces Parallel Board-to-Board Connectors

August 6th, 2018

mill-max-logo

 

Mill-Max is proud to present new Horizontal SMT (HSMT) headers and sockets ideally suited for low
profile parallel board-to-board or board-to-component mating.  These new sockets and headers are an excellent choice for applications where vertical board stacking is not an option, such as in LED lighting systems.

Learn more at www.mill-max.com

Bivar Releases New Zero Light Bleed LPR & LPV Rigid Light Pipes

April 13th, 2018

Bivar launches new zero light bleed LPR & LPV Rigid Light Pipes featuring an innovative black adapter design that surrounds the LED and channels the light directly to the lens, eliminating light bleed at the LED source. This series is available in two configurations to accommodate most application requirements and they are available in a range of sizes and lens styles.

Product Highlights

Zero Light Bleed at the LED

High Vibration Environments

Easy Installation

Right Angle and Vertical Configurations

Industry Use: Datacom, Energy & Utility, Audio/Video, Security, Healthcare

 

Learn more at www.bivar.com

New! Super Low-Profile Interconnect Sockets from Mill-Max

April 4th, 2018

mill-max-logo

Many of today’s products, such as implantable and wearable devices for the medical industry, demand miniaturization along with high functionality and reliability. Those requirements drive designers to find durable solutions to package more electronics into smaller spaces; these new sockets can be exactly what you are looking for.

Learn more at www.mill-max.com

New Manufacturer: Sharp Microelectronics of the Americas

March 15th, 2018

 

 

Control Sales, Inc. announces a partnership with Sharp Microelectronics of the Americas (SMA), a premier manufacturer of Industrial and Memory LCDs with a legacy of leading-edge, performance-based products.

“Sharp’s global leadership in LCD technology cannot be overstated,” said Kingsland Coombs, President of Control Sales. “We can now offer our customers an LCD brain trust with deep knowledge on virtually every vertical industry and solution set. Sharp’s products include Industrial TFT LCDs covering a vast array of specifications and Memory LCDs for wearables and battery-operated industrial products. Both product lines are in immediate demand in our territory. We are proud to represent a manufacturer with world class products, deep engineering resources, and US-based technical support.”

 

About Sharp Microelectronics of the Americas (SMA)

Sharp Microelectronics of the Americas, a division of Sharp Electronics Corp., (a N.Y. Corporation), is headquartered in Camas, WA and has field offices across North America. Sharp’s components are designed for top performance and ease of integration, and are continually re-envisioned to meet emerging market demand and to take advantage of the latest Sharp technology innovations.

The Industrial Application LCD product line-up includes sunlight readable LCDs, industrial-grade Full-HD displays, and a vast array of other specifications aimed at performance in the most extreme environments. The Memory LCD products are the perfect solution for compact handheld, battery-operated, wearable, and other small-screen applications.

TDK Corporation Announces the 100W rated TDK-Lambda i3A Series

January 24th, 2018

TDK Corporation announces the introduction of the 100W rated TDK-Lambda i3A series of non-isolated DC-DC converters. Capable of operating from an input voltage of 9V to 53V, the step-down converter delivers an output voltage that can be adjustable from 3.3 to 16.5V or 5 to 30V with output currents of up to 8A. The series is designed to be used in a wide range of applications including medical, communications, industrial and test and measurement equipment.

Learn more at www.us.tdk-lambda.com